You need to clean it for sure. It seems use a drill press (not hand drill) with polishing tool will do the job. Hand filing is not recommended.
The contact face is very dirty
所有跟帖:
• 谢谢首长指示!我在零件店看到一种小号的三爪磨刀,沙面也就一寸左右可否? -triangle- ♂ (0 bytes) () 01/25/2011 postreply 11:44:09
• Yes, but do not force it -biglow- ♂ (202 bytes) () 01/25/2011 postreply 11:53:50
• 有一事我有点糊涂了,难道定时皮带断掉没有打坏valve? -triangle- ♂ (214 bytes) () 01/25/2011 postreply 12:05:14
• 如果引擎是interference类型的,valve容易坏。你的车可能不是。 -00zz7788- ♂ (0 bytes) () 01/25/2011 postreply 12:28:37
• 1999 honda accord -triangle- ♂ (0 bytes) () 01/25/2011 postreply 12:34:30
• 1995 2.7L的Accord可以肯定是interference类型的。 -00zz7788- ♂ (0 bytes) () 01/25/2011 postreply 13:05:33
• 从照片和实物上分析,似乎1999 honda accord不是interference类型的(图) -triangle- ♂ (148 bytes) () 01/25/2011 postreply 13:11:26
• 如果它是,则我们就没有机会讨论如何rebuilding了。 -00zz7788- ♂ (0 bytes) () 01/25/2011 postreply 14:07:22
• 此话怎讲?发动机会车底报废? -triangle- ♂ (0 bytes) () 01/25/2011 postreply 14:20:17
• 无法修复。 -00zz7788- ♂ (0 bytes) () 01/25/2011 postreply 14:21:43
• Learn some basis -biglow- ♂ (298 bytes) () 01/25/2011 postreply 13:11:47
• 这个我看明白了,可能这么一磕,磕掉了seat上的一些碳渣 -triangle- ♂ (81 bytes) () 01/25/2011 postreply 13:15:54
• 还有valve看起来怎么都是好好的?没弯啊 -triangle- ♂ (0 bytes) () 01/25/2011 postreply 11:44:48