回复：请问一下，好不好换 pads and rotors?

来源: Yangtze430030 于 2010-09-17 10:14:39 [] [旧帖] [给我悄悄话] 本文已被阅读： 0 次 (743 bytes)
回答: 请问一下，好不好换 pads and rotors? 由 verilog 于 2010-09-17 09:34:06
It's extremely easy to change front rotors and pads. If you change the pads and no vibration then you do not have to do anything to the rotors. If brakes vibrate then you need to do either of the following;

1. If you rotors never resurfaced before, meaning ithey have enough thickness, ask a shop to re-surface your rotors for probably $10-15 per rotor and then install new pads by yourself;

2. If your rotors had been resurfaced before, just buy new rotors and pads and install them by yourself.

Do not ask dealers to resurface since it's the most costly option. If you can not find any shop to turn the rotors for you, just buy new ones and they are much cheaper comparing to dealer resurfacing or replacing rotors.

所有跟帖： 

• thank you very much. Excellent advice. -verilog- ♂ 给 verilog 发送悄悄话 verilog 的博客首页 (227 bytes) () 09/17/2010 postreply 11:59:32

• If brake light is on, you may need brake fluid. -BigV8- ♂ 给 BigV8 发送悄悄话 (567 bytes) () 09/17/2010 postreply 12:20:24

• brake fluid is fine. break light is on and off! -verilog- ♂ 给 verilog 发送悄悄话 verilog 的博客首页 (283 bytes) () 09/17/2010 postreply 12:56:42

• Does the car has pad sensors? If not, -BigV8- ♂ 给 BigV8 发送悄悄话 (168 bytes) () 09/17/2010 postreply 13:46:53

• good question! -verilog- ♂ 给 verilog 发送悄悄话 verilog 的博客首页 (231 bytes) () 09/17/2010 postreply 13:55:20

• Dealer mechanic knows everything. What they recommend is -BigV8- ♂ 给 BigV8 发送悄悄话 (149 bytes) () 09/17/2010 postreply 14:03:17

• I see, thank you. Will check it this weekend! -verilog- ♂ 给 verilog 发送悄悄话 verilog 的博客首页 (0 bytes) () 09/17/2010 postreply 14:21:00

请您先登陆，再发跟帖！

发现Adblock插件

如要继续浏览
请支持本站 请务必在本站关闭/移除任何Adblock

关闭Adblock后 请点击

请参考如何关闭Adblock/Adblock plus

安装Adblock plus用户请点击浏览器图标
选择“Disable on www.wenxuecity.com”

安装Adblock用户请点击图标
选择“don't run on pages on this domain”