象图里这种方头的,要怎么fasten wires?push down? 油管上看到的都是圆头的,wire插进去,啰丝刀转转就好了。请哪位高手指点一下,感谢。
请教:Replace Thermostat
所有跟帖:
• Push and release -越王剑- ♂ (0 bytes) () 12/15/2022 postreply 16:32:57
• 谢谢,那这个松紧就不如啰丝刀转转的好掌控。 -black&white- ♀ (0 bytes) () 12/15/2022 postreply 17:22:31
• 现在低伏特的线,很多用这接线法,省了螺丝刀这工具。我最近在花园和屋子边装了一批低伏特的照明灯,全都是用这方法接线。 -hhtt- ♂ (0 bytes) () 12/15/2022 postreply 17:31:54
• 谢谢,省了螺丝刀,怎么push? 怎么掌控不松不紧,正正好? -black&white- ♀ (0 bytes) () 12/15/2022 postreply 17:35:31
• 应该是弹簧片,压一下线就可以插入,松掉拔不出来就是压紧了 -周老大- ♂ (0 bytes) () 12/15/2022 postreply 18:16:40
• 我再给个怎么接线的网站链接。 -hhtt- ♂ (160 bytes) () 12/15/2022 postreply 18:20:44
• 哇,太厉害了。这也搜得到。这信息太有用了!谢谢。 -black&white- ♀ (0 bytes) () 12/15/2022 postreply 18:29:51
• Do you have picture of the reverse side? What's the model? -冬前- ♂ (0 bytes) () 12/15/2022 postreply 17:08:52
• 背面是这样的。model:1F80-0261,Emerson, White Rodgers, -black&white- ♀ (81 bytes) () 12/15/2022 postreply 17:30:25
• Insert the wires into the holes while the small square butto -冬前- ♂ (229 bytes) () 12/15/2022 postreply 18:33:13
• Someone has a video for it... see inside -冬前- ♂ (133 bytes) () 12/15/2022 postreply 18:37:23
• 厉害了,video 也找到了。太谢谢了! -black&white- ♀ (0 bytes) () 12/15/2022 postreply 19:46:18
• 现在真是方便。以前只在工业机器上见过这种wiring,一般也是低电压的。 -Wei_PDX- ♂ (0 bytes) () 12/15/2022 postreply 18:58:33