换了BMW的JBE module, 需要把VINcode进去,我有ISTA-D,做不了code。有没有可靠的ISTA-P或者其它工具推荐?谢谢
ISTA-P
所有跟帖:
• 也可以找一家专修欧洲车的车行,一般花100-200搞定。 -PrimeryColor- ♀ (27 bytes) () 09/13/2023 postreply 14:21:23
• 看是那年的车, 早点的可用 ncs-expert coding, 我的马车卖了,连带laptop 都送买家了 -bushihandyman- ♂ (0 bytes) () 09/13/2023 postreply 15:53:40
• 还想说让他找你聊呢!:-DDD -Oneshotkill- ♂ (0 bytes) () 09/13/2023 postreply 15:57:04
• 须要win XP, 这年头难找啊,呵呵 -bushihandyman- ♂ (0 bytes) () 09/13/2023 postreply 15:59:45
• 王婆卖一次瓜哈 -bushihandyman- ♂ (138 bytes) () 09/13/2023 postreply 16:04:33
• XP倒是不难找,Win7/10也可以,这套工具对硬件配置要求低,三五十刀的笔记本也能玩转。 -Oneshotkill- ♂ (0 bytes) () 09/13/2023 postreply 16:38:32
• 你说对了,只要能润XP就可以。当年还真费了不少劲找xp, win7/10 ncs-expert还真不行. Inpa 可以 -bushihandyman- ♂ (0 bytes) () 09/13/2023 postreply 19:49:22
• 套装我在WIN11上装过,无报错提示,能正常打开,但没有联车测试过,等闲闲暇时测试看看。 -Oneshotkill- ♂ (0 bytes) () 09/13/2023 postreply 20:02:29
• 你试一下吧,NCS Expert win7-64bit 我是连不上, inpa win7 可以用。 -bushihandyman- ♂ (0 bytes) () 09/14/2023 postreply 05:09:44
• 上阿里快递上找一找,看见过 -soccer88- ♂ (0 bytes) () 09/13/2023 postreply 16:55:42