Honda odeyssey 2003, crankshaft pull bolt won't come loose

Holding tool does not work. Finally have to try the starter method. Still won't come loose, even broke my half inch breaker bar.

Just changed another breaker bar, took it right off!

所有跟帖： 

• 如果是下面的，卸下轮子可以看到用大impact wrench -soccer88- ♂ (0 bytes) () 01/28/2018 postreply 14:57:09

• 电动的没戏, 气动的没有. 好在现在卸下来了 -色大胆小- ♂ (0 bytes) () 01/28/2018 postreply 15:07:41

• 找朋友借一个了 -soccer88- ♂ (0 bytes) () 01/28/2018 postreply 15:15:24

• 千万别用3/8英寸的adaptor -QYZ- ♂ (0 bytes) () 01/28/2018 postreply 16:33:36

• 这并不说明后来的break bar比第一个好，第一个不好倒是个事实 -MoonRiverMe- ♂ (0 bytes) () 01/28/2018 postreply 16:12:04

• 第一，买个好点儿的工具 -biglow- ♂ (154 bytes) () 01/28/2018 postreply 20:49:37

• 好，下回买个3尺以上的 breaker bar. -色大胆小- ♂ (0 bytes) () 01/29/2018 postreply 10:05:37

• 买根镀锌管子，套在break bar上 -RoseBuilder- ♂ (0 bytes) () 01/29/2018 postreply 13:24:30

• 以前常用一根掉屋顶风扇用的金属管，也用过电线套管（这个比较软，但是长度很长） -色大胆小- ♂ (0 bytes) () 01/29/2018 postreply 14:34:39

• 这是要换timing belt? -dvdport- ♀ (87 bytes) () 01/29/2018 postreply 09:48:25

• 是用starter method 卸下的 -色大胆小- ♂ (0 bytes) () 01/29/2018 postreply 10:04:31