遭遇垃圾设计,一个狗屁空气过滤器,花了一个小时,先卸了电池,断了三个传感器接口,牺牲了两把扳子,手上破了两块皮。
遭遇垃圾设计
所有跟帖:
• 什么车? -老生长谈- ♂ (0 bytes) () 01/13/2018 postreply 11:47:09
• 15 马自达MPV -穷则思变- ♀ (0 bytes) () 01/13/2018 postreply 14:44:40
• 到油管上看看别人是怎么换的.一般来说空滤是保养件,不应该设计得难换 -老生长谈- ♂ (0 bytes) () 01/13/2018 postreply 15:06:52
• 找了,没找到 -穷则思变- ♀ (0 bytes) () 01/13/2018 postreply 15:21:39
• 这个空气过滤器设计有什么不对? -fourwaves- ♂ (0 bytes) () 01/13/2018 postreply 11:48:24
• OP is trying to complain that -jassco- ♂ (134 bytes) () 01/13/2018 postreply 13:37:11
• 根本就打不开那个盒子。 -穷则思变- ♀ (0 bytes) () 01/13/2018 postreply 14:45:58
• I replaced engine filters a few times to both -jassco- ♂ (168 bytes) () 01/13/2018 postreply 17:38:03
• 俺是不可能信的,盒子没有盖? -chinomango- ♂ (0 bytes) () 01/13/2018 postreply 20:05:04
• 盖不是上下的,是横着的 -穷则思变- ♀ (0 bytes) () 01/14/2018 postreply 08:57:45
• 图片显示的不是问题所在 -fourwaves- ♂ (0 bytes) () 01/13/2018 postreply 17:46:16
• 提醒各位大佬,干活是PPE一定要有。手套,护目镜不能少。 -coolwin- ♀ (0 bytes) () 01/13/2018 postreply 12:52:02
• 车子还得架牢了,在车底下拧螺栓时往往是要用横向力的,车子会受到一个水平拉力的 -MoonRiverMe- ♂ (0 bytes) () 01/13/2018 postreply 20:10:27