maybe tumbler is worn out causing circuit short

when the indicator light is on, did you go out (put gear on P) to see if high beem is REALLY on?  if not, then ignore the indicator or use a tape to cover it up as only it is not flashing your eyes.

所有跟帖： 

• indicator light 亮时，high beam 也确实同时亮了 -abc321123- ♀ (176 bytes) () 11/11/2011 postreply 16:18:25

• huh, thought it's tumbler but AC shouldn't be on -internuts- ♂ (224 bytes) () 11/11/2011 postreply 16:27:05

• 可怜我还得查字典去猜。。。谢谢，正在看手册，回头再来询问 -abc321123- ♀ (0 bytes) () 11/11/2011 postreply 16:38:59

• 觉得是电路问题。 因为当不亮时，我把开关打到ON时，可以正常亮 -abc321123- ♀ (112 bytes) () 11/11/2011 postreply 17:30:01

• 是电路问题 (maybe switch malfunctioning) -internuts- ♂ (0 bytes) () 11/11/2011 postreply 18:10:28

• 这肿猜想比较合理。但这部分一般在什么地方？不可能打开前盖就能看见 -abc321123- ♀ (25 bytes) () 11/11/2011 postreply 19:01:01

• 不会在engine bay，先从大灯开关查起 -internuts- ♂ (0 bytes) () 11/11/2011 postreply 20:09:53