It is easy DIY

If you means the warning light on instrument panel, it is easy to fix it yourself.

Use a screw driver to loosen 2 or 3 screws on the intrument panel. then the panel can be taken off, you can see a curcit board. disconnect a wire connector, the board is free now. the brake warning light is a tiny bulb. buy a replacement bulb, put in on, and put everything back. If you have the bulb on hand, the whole process takes about 15 minutes. I have replaced a turn signal bulb this way.

所有跟帖： 

• Thanks. I will try to do it myself. -无影腿- ♂ (0 bytes) () 02/15/2011 postreply 04:16:39

• 别急,先搞清是哪的问题. 1)表盘上的LED指示灯坏, 换灯; 2)手刹处的接触开关坏,一般为接触不良.如果是2),不修也无妨, -3DMan- ♂ (0 bytes) () 02/15/2011 postreply 05:58:04

• Thank you so much for the information. -无影腿- ♂ (0 bytes) () 02/15/2011 postreply 09:46:26

• smart way. -3DMan- ♂ (0 bytes) () 02/15/2011 postreply 20:58:30

• Thank you very much! -无影腿- ♂ (0 bytes) () 02/17/2011 postreply 11:48:33