check cylinder pressure is best option for now.

来源: 顺序是否有要求 于 2010-12-30 09:30:01 [] [旧帖] [给我悄悄话] 本文已被阅读： 次 (186 bytes)
回答: First of all 由 biglow 于 2010-12-29 21:33:25

However, if your friend did not try to start by cranking the starter, the valves will be ok, just replace timing belt.  Otherwise , it will be a valve job.

Good luck.

所有跟帖： 

• thanks a lot! unfortunely I did that for many times. -triangle- ♂ 给 triangle 发送悄悄话 (42 bytes) () 12/30/2010 postreply 11:12:34

• 回复：thanks a lot! unfortunely I did that for many times. -顺序是否有要求- ♂ 给 顺序是否有要求 发送悄悄话 (314 bytes) () 12/30/2010 postreply 19:26:33

• Replacing pistons is very easy once you removed the engine head. -buddy1234567us- ♂ 给 buddy1234567us 发送悄悄话 (378 bytes) () 12/30/2010 postreply 21:06:02

请您先登陆，再发跟帖！

发现Adblock插件

如要继续浏览
请支持本站 请务必在本站关闭/移除任何Adblock

关闭Adblock后 请点击

请参考如何关闭Adblock/Adblock plus

安装Adblock plus用户请点击浏览器图标
选择“Disable on www.wenxuecity.com”

安装Adblock用户请点击图标
选择“don't run on pages on this domain”