请教Handy的地主:想换换shower水龙头上的把柄旋转部分,结果螺丝纹丝不动然后起子就打滑了。这样情况有什么办法解决
所有跟帖:
• 换个力气大的。。 -borisg- ♂ (0 bytes) () 09/14/2022 postreply 08:29:07
• 最好上个照片。螺丝头是六角的吗? -原上草2017- ♂ (0 bytes) () 09/14/2022 postreply 08:29:31
• 试了好多次上传图片都失败了,是十字螺口 -CA2020- ♀ (0 bytes) () 09/14/2022 postreply 08:31:43
• u need a strong guy to put more pressure on the screw. -borisg- ♂ (0 bytes) () 09/14/2022 postreply 08:35:28
• 雇人干吧。 我就是没力气,干不了,请人干了。 -minin-地主婆80- ♀ (0 bytes) () 09/14/2022 postreply 08:40:23
• screw extractor -柠檬椰子汁- ♂ (188 bytes) () 09/14/2022 postreply 08:41:52
• 谢谢,不是在木头上,是在淋浴的水龙头上,今天我无论如何都上转不了照片 -CA2020- ♀ (0 bytes) () 09/14/2022 postreply 08:45:00
• pick your poison. -柠檬椰子汁- ♂ (324 bytes) () 09/14/2022 postreply 08:53:10
• 谢谢,问题是螺丝的十字切合口已经磨损到起子一动就打滑, -CA2020- ♀ (0 bytes) () 09/14/2022 postreply 08:40:46
• You need the right size of the screw driver for the screw,.. -冬前- ♂ (251 bytes) () 09/14/2022 postreply 08:41:08
• 谢谢,用了不同的起子都不行 -CA2020- ♀ (0 bytes) () 09/14/2022 postreply 08:49:37
• Drill it then carefully remove it with plier, apply WD40 too -冬前- ♂ (45 bytes) () 09/14/2022 postreply 08:52:32
• 这个风险比较大,因为不想换整个水龙头。 -CA2020- ♀ (0 bytes) () 09/14/2022 postreply 09:08:29
• 记得要锉? -hz82000- ♀ (0 bytes) () 09/14/2022 postreply 08:44:59
• 具体怎么锉呢 -CA2020- ♀ (0 bytes) () 09/14/2022 postreply 08:45:51
• I don't think you can do it without causing damages. -borisg- ♂ (40 bytes) () 09/14/2022 postreply 09:04:46
• 没办法可能最后只能叫别人做了 -CA2020- ♀ (0 bytes) () 09/14/2022 postreply 09:15:45
• 她应该是指开一条槽用平头螺丝刀。这个弄不好会伤到自己,不建议你自己试。 -周老大- ♂ (0 bytes) () 09/14/2022 postreply 11:21:45
• 象这样的 -周老大- ♂ (88 bytes) () 09/14/2022 postreply 16:14:50
• 试WD40。如塑料把手可想法锯开或将螺丝外圈塑料钻破坏到可用手钳等拧螺丝。 -IEbird- ♀ (0 bytes) () 09/14/2022 postreply 09:35:44
• 谢谢,这个可以试试 -CA2020- ♀ (0 bytes) () 09/14/2022 postreply 09:53:55