我家二楼晾台的French Door门框立着的部分, 下面小半截(1/4)因为雨水的缘故朽了, 想换掉, 门是好的。 本地最好的木匠说要把门拿到工厂去请他们定做一个新的门框。 500、600块吧, 问题是现在工厂还不开门, 不知道要等到什么时候。
我看homedepot有卖现成的门框的, 不太明白为什么要定制门框。 木匠说定制的精确度比较高。 是这样的吗?门是标准尺寸的。
我另外看见网上有人把门框朽的部分挖掉, 用epoxy填上就好了, 这个好像我自己都可以做。
请大家指点一下。 谢谢
我家二楼晾台的French Door门框立着的部分, 下面小半截(1/4)因为雨水的缘故朽了, 想换掉, 门是好的。 本地最好的木匠说要把门拿到工厂去请他们定做一个新的门框。 500、600块吧, 问题是现在工厂还不开门, 不知道要等到什么时候。
我看homedepot有卖现成的门框的, 不太明白为什么要定制门框。 木匠说定制的精确度比较高。 是这样的吗?门是标准尺寸的。
我另外看见网上有人把门框朽的部分挖掉, 用epoxy填上就好了, 这个好像我自己都可以做。
请大家指点一下。 谢谢
• you replace the same way, it will rot the same way... -borisg- ♂ (61 bytes) () 05/06/2021 postreply 13:47:35
• you may also cut off the damaged frame section, replaced with -IEbird- ♀ (58 bytes) () 05/06/2021 postreply 13:58:04
• 问题在于修完开关门费不费劲 -越王剑- ♂ (119 bytes) () 05/06/2021 postreply 14:06:06
• The issue is this is definitely not the normal situation. -borisg- ♂ (31 bytes) () 05/06/2021 postreply 14:06:11
• If the situation is too bad, this is an alternative, has been pr -IEbird- ♀ (0 bytes) () 05/06/2021 postreply 14:19:31
• practiced by LD. -IEbird- ♀ (0 bytes) () 05/06/2021 postreply 14:19:59
• 自己修补的 option 应该最简单,但有图片才知道行不行。 -LexusOnly- ♂ (0 bytes) () 05/06/2021 postreply 14:36:15
• 门的照片 -Hurstian- ♂ (526 bytes) () 05/06/2021 postreply 15:15:09
• 完全可以把它挖掉,填一块treated木块补上,刷上油漆。 -LexusOnly- ♂ (0 bytes) () 05/06/2021 postreply 15:28:24
• auto store body filler. -borisg- ♂ (0 bytes) () 05/06/2021 postreply 15:29:55
• 这个行吗? -Hurstian- ♂ (87 bytes) () 05/06/2021 postreply 18:21:53
• after your fixing up buy an awning to overhang your door -家教- ♂ (0 bytes) () 05/06/2021 postreply 19:59:00