用ELM 327 查看了 close loop时的 o2 sensor 输出
sensor 1 (pre catalyst) 在0.2 到 0.8伏之间快速震荡
sensor 2 (after catalyst) 在0.2 到 0.8伏之间震荡,但频率比 sensor 1 慢 3~4倍
真的是 catalyst 不行了么?
• 看起来是。 -biglow- ♂ (0 bytes) () 12/01/2009 postreply 12:04:42
• 都12万迈了,还是先把后面那个O2换了先, 反应速度慢的O2也会有这个问题的. -我胡说八道- ♂ (0 bytes) () 12/01/2009 postreply 12:26:08
• 如果催化剂没问题,后面那个O2是不是应该一直输出在 0.2 V? -68245- ♀ (0 bytes) () 12/01/2009 postreply 12:35:56
• 不是, 要波动, 但波动得比前面慢, 究竟多快算合格,我也 -我胡说八道- ♂ (134 bytes) () 12/01/2009 postreply 12:51:56
• 先换bank1 o2 -雨鹤- ♀ (0 bytes) () 12/01/2009 postreply 12:52:16
• which one please? sensor 1 or 2? 能说下原因么?谢谢 -68245- ♀ (0 bytes) () 12/01/2009 postreply 13:10:42
• 离engine最近的,建议自己换,很容易,换上 -雨鹤- ♀ (47 bytes) () 12/01/2009 postreply 15:02:51
• 老大, 我觉得是要换离engine最远的(rear sensor), -我胡说八道- ♂ (35 bytes) () 12/02/2009 postreply 07:19:30
• 回复:2000 Odyssey P0420, Is the catalytic converter or else? -fxm- ♂ (25 bytes) () 12/01/2009 postreply 18:09:03