回复：马上要给bumper cover(塑料的) 喷漆, 有经验的朋友请指教!谢谢

来源: biglow 于 2009-07-13 11:43:46 [] [博客] [旧帖] [给我悄悄话] 本文已被阅读： 0 次 (252 bytes)
Sand off, finishing with 1600+ grit sand paper, wash to spotless, dry then spray. cover all other areas that you do not want paint to be sprayed on. Spray less amount but multiple time. spray back and forth, but do not focus on one spot. Good luck!

所有跟帖： 

• Yes to both. -biglow- ♂ 给 biglow 发送悄悄话 biglow 的博客首页 (68 bytes) () 07/13/2009 postreply 14:08:38

请您先登陆，再发跟帖！

发现Adblock插件

如要继续浏览
请支持本站 请务必在本站关闭/移除任何Adblock

关闭Adblock后 请点击

请参考如何关闭Adblock/Adblock plus

安装Adblock plus用户请点击浏览器图标
选择“Disable on www.wenxuecity.com”

安装Adblock用户请点击图标
选择“don't run on pages on this domain”