没啥说的，懂的自然懂，不懂还是投资些时间吧！
Wood ramps work great for me because I don't have to jack the car (I hate jacking the car up!). Unless you have to remove the wheels for brake jobs, wheel bearing etc., the wood ramps work great for 99% of the time you don't need to jack the car:
- Changing Engine Oil
- Changing Trans Oil
- Changing Rear Diff Oil
- Checking Exhaust
- Brake bleeding
- Changing O2 sensors
- Changing Engine and Trans Mounts
- Chassis Inspection.
Example of wood ramp (the "top landing" should be long like this pic, but the "stairs steps" can be shorter about 8" for me): ， not me 啊！copy来的
我的私货在这里 关于自制修车用木头ramp的两个帖子
一个比较完整的例子，网上转的供参考。
那个scissor jack最多换个轱辘保养个刹车，我是一直没有找到用它如何同时整Jack stands,
就那么一个支撑点，不知那个jack stand支撑在哪里？
液压Jack倒是可以支撑前后中部的支撑点，然后上jack stands.
个人经验，至少适用丰田和宝马车系。
开个板砖贴，搬个板凳坐等大佬指教！
