Another suggestion
Sounds like your problem occurred right after your DIY. One possibility is that you accidentally did something else without knowing it. If one of your engine cylinders is not working (say due to bad spark plug or the wire connecting to the spark plug), then you'll experience loss of power. In this case, I suggest you check the wire connection that goes to the spark plug. Many years ago I had a bad wire connection to spark plug and everything appears to be fine until going uphill.
所有跟帖:
•
好建议。这也正是我下一步想做的事。
-十万个怎么办-
♀
(0 bytes)
()
05/22/2010 postreply
13:18:26