有那句看不懂的再上来问，不要瞎猜。实在懒得自己做可以打电话给OBi, 付10美元搞定。
Obi官网：
https://www.obitalk.com/forum/index.php?topic=9.0
看来你不太明白官网说的话。
首先告诉我们你的OBi小盒子的型号---OBi100（最常见）？OBi200?...
第二，你用的什么电脑下载的 firmware? Windows? Apple? etc
如果是OBi100（包括110）, 按官网的指示，从下面link下载：
http://fw.obihai.com/OBi-latest.fw
如果是200/300系列则
http://fw.obihai.com/OBi2-latest.fw
记下你下载到哪里了---如搞不清，问家里下一代小屁孩或邻居小屁孩。他们一般对电脑都知道点。
1. Download the above linked file to your computer. （姑且假定你已经下载了，但请记住下载到哪里了）
2. Access the web page of the OBi device (OBi via Internet/WAN Port):
- From a phone attached to the PHONE port of the OBi dial * * * 1 （拨 * * * 1， 听仔细了，记下！）
- The IP address of the OBi will be read to you
- Open a new browser window on your PC and enter the IP address of the OBi. （这句能看懂吗？）
E.g. 192.168.1.110 （这个是“比如”的意思，你听到啥就输入啥） - When prompted, enter "admin" for username and "admin" for password. （这句能看懂吗？）
If you have previously changed the password, use that instead of "admin." - OBi202/OBi302 Note: To access the OBi via the LAN port, by default the LAN port IP (Gateway) address is: 192.168.10.1
- OBi202/OBi302 Note: To access the integral web page via the WAN port, you may need to enable WAN access. To do this, from the connected phone dial ***0. Next, enter 30# - Press 1 to enter a new value - Press 1# to enable - Press 1 to save.
3. Now that you have accessed the OBi web page, go to the "System Management" - "Device Update" page. From there, "Browse" to the firmware file you just downloaded above and click Update. （能看懂吗？这个小窗口问你下载的firmware在哪里，要点进去找到它）
4. Wait for the OBi to restart (approx. 30-60 seconds) and you will be good to go.（耐心等1-2分钟，不要急）
完了拨一下这个Echo test 电话 --- 1-909-390-0003 或 1-925-259-0082， 可能没有铃响，你说话，对面有“回声”那就对了
