安照OBitalk指示，Option 3. Manual Update...

https://www.obitalk.com/forum/index.php?topic=9.0

 

Option 3 - Manual Update:

Manual Update Instructions:

1.  Download the above linked file to your computer.

2.  Access the web page of the OBi device (OBi via Internet/WAN Port):

• From a phone attached to the PHONE port of the OBi dial * * * 1
• The IP address of the OBi will be read to you
• Open a new browser window on your PC and enter the IP address of the OBi.
           E.g.  192.168.1.110 (这里要用你打 ***1 时听到的数字)
• When prompted, enter "admin" for username and "admin" for password.  
           If you have previously changed the password, use that instead of "admin."
• OBi202/OBi302 Note: To access the OBi via the LAN port, by default the LAN port IP (Gateway) address is: 192.168.10.1
• OBi202/OBi302 Note: To access the integral web page via the WAN port, you may need to enable WAN access.  To do this, from the connected phone dial ***0.  Next, enter 30# - Press 1 to enter a new value - Press 1# to enable - Press 1 to save.

3.  Now that you have accessed the OBi web page, go to the "System Management" - "Device Update" page.  From there, "Browse" to the firmware file you just downloaded above and click Update.  

4.  Wait for the OBi to restart (approx. 30-60 seconds) and you will be good to go.